Heavy Equipment training courses and schools
Heavy Equipment Operator programs, certificates, diplomas and degrees

Total 104 training course(s)/program(s) at schools in United States.



Texas Southern University

Training Center/Campus: Houston, Texas, United States
Phone No.: 713-313-7011

Medium / Heavy Diesel Automotive Technician (Certificate)

Course Format: Online / Virtual Classroom / Webinar  V

Our Medium/Heavy Diesel Automotive Technician three-part course series covers industry trends and current technology to provide an in-depth guide to highway diesel engines and their management. This series prepares entry-level and experienced technicians alike for a successful career as a Medium/Heavy Diesel Automotive Technician by outlining the role of the truck technician, industry tools and standards for safety, and steps for diagnosing and servicing a full range of diesel engines. Learn the necessary knowledge to gain employment in the automotive industry with up-to-date content including the principles and practices underlying current and proposed ASE and NATEF tasks and the most current diesel engine management electronics used in the industry. This series provides everything a student needs to know to diagnose, service, and maintain diesel engine systems.

After completing this course, you should be able to:
•Comprehend the role of the truck technicia... [Read More]

Medium/Heavy Diesel Automotive Technician Exam Prep (Certificate)

Course Format: Online / Virtual Classroom / Webinar  V

Our Medium/Heavy Diesel Technician Exam Prep course prepares students to sit for the National Institute for Automotive Service Excellence (ASE) T1-T8 certification exams. This course outlines specific ASE tasks and content related to their diagnosis, maintenance, and repair. Students will practice with pretests and ASE style exam questions to fully prepare for the exam and become familiar with its format. Learn the knowledge you need to master these ASE certification exams today!

Prerequisite(s): Medium/Heavy Diesel Technician Training

Medium/Heavy Diesel Automotive Technician Exam Prep Module 1
Gasoline Engines
•General Engine
•Cylinder Head and Valve Train
•Engine Block
•Lubrication and Cooling Systems
•Ignition System
•Fuel and Exhaust Systems
•Battery, Starting, and Charging Systems
•Emissions Control Systems
•Computerized Engine Controls

Medium/Heavy Diesel Automotive Technician Exam Prep ... [Read More]


Houston Community College

Training Center/Campus: Houston, Texas, United States
Phone No.: 713.718.2000

Heavy Vehicle & Truck Repair (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

The Heavy Vehicle &, Truck Repair program provides skilled and knowledgeable entry-level employees to heavy equipment industries all over Texas. Employers actively seek HCC Heavy Vehicle &, Truck Repair graduates to work as engine or maintenance specialists and field technicians.


East Valley Institute of Technology

Training Center/Campus: Mesa, Arizona, United States
Phone No.: 480-461-4000

Diesel

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The diesel and heavy equipment industry is one of the fastest growing fields in the transportation business today. Diesel mechanics work on a wide variety of diesel engines including those found in buses, trucks, RVs, bulldozers, cranes, farm tractors and trains.

Students develop the skills needed for entry-level positions through classroom and hands-on learning. Instruction is provided on cooling systems, starting and charging systems, engine lubrication, maintenance and repair, and basic mechanical performance.

Length: 2-4 Semesters

Recommended: 2.0 GPA, (1) Math credit, (1) English credit, automotive repair skills

Possible Careers: Diesel Technician, Heavy Assembler, Field Operator


GateWay Community College

Training Center/Campus: Phoenix, Arizona, United States
Phone No.: (602) 286-8000

Heavy Equipment Operations (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The Associate in Applied Science (AAS) in Construction Trades: Heavy Equipment Operations degree is designed to provide apprentices and journeymen with a broadened educational background and leadership skills so that students completing the associate degree program may be better equipped to enter supervisory and managerial positions.

The Certificate of Completion (CCL) in Construction Trades: Heavy Equipment Operations program is designed to train heavy equipment operators in safety related to heavy equipment operations, basic calculations, rigging, maintenance, and troubleshooting. Specific vehicles that will be used in training will include but not be limited to: tractors, scrapers, aerial lift trucks, backhoes, graders, forklifts, bull dozers, all terrain vehicles, excavators, and cranes. Training will include earth moving, grading, soil analysis, hazardous materials management, and soil compaction. This classroom training is supplemented with required on-the-j... [Read More]


San Diego Miramar College

Training Center/Campus: San Diego, California, United States
Phone No.: 858.536.7800

Heavy Duty Truck, Advanced Transportation, Equipment Preventive Maintenance and Inspections

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This course covers the fundamental skills necessary for preventive maintenance on trucks and other heavy-duty equipment. Students learn to perform inspection and maintenance procedures on heavy duty trucks, alternative fueled trucks, heavy equipment. Topics include theory of maintenance practices, industry related Material Safety Data Sheets (MSDS) and hazardous materials (HAZMAT) documentation, California Biannual Inspection of Terminal (B.I.T.), heavy-duty shop tools and equipment usage, and service literature usage. This course is designed for students interested in the commerical diesel and alternative fuel industry.

Forklift (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

This course covers the theory, principles, and operation of forklifts. Topics include forklift safety, use and operation, load handling, preventive maintenance and upkeep, problem identification. This course is designed to prepare students for the Occupational Safety and Health Administration (OSHA) Forklift Certification.


Western Truck School

Training Centers/Campuses: Bakersfield, Turlock, Sacramento, San Diego, California, United States
Phone No.: 1-800-929-1320

Forklift (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Also known as &,quot,Mobile Equipment Operator&,#146,s Certification&,quot,, our Forklift Certification program is designed for inexperienced operators who wish to learn the practical and safe operation of a forklift. Class size shall be limited to six students at a time. Classroom instruction in the principles, theory and regulations related to forklift operation and includes a review of equipment requirements, warnings, precautions, hazards and principles. Hands-on operation learning controls and instrumentation, power plant inspection, operation and maintenance, techniques for steering and maneuvering, visibility limitations, refueling, load manipulation (stacking and unstacking), equipment capacity and stability and operation in narrow aisles or other restricted areas is provided. Upon observation and evaluation by an instructor trained in certification, each student shall receive a Mobile Equipment Operator&,#146,s Certification.

Mobile Equipment ... [Read More]


South Seattle Community College

Training Center/Campus: Seattle, Washington, United States
Phone No.: 206-934-5300

Lift Truck Operator

Course Format: Public Course / Instructor-Led / Open Enrollment

A course to obtain a lift truck operator’s safety certification card. Student will learn current regulations as well as demonstrating practical fork lift operation.

Diesel and Heavy Equipment (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The South Seattle Community College Diesel and Heavy Equipment Technology program trains students in all aspects of diesel and heavy equipment repair. Technicians are likely to:
•Repair and maintain trucks, buses, construction equipment, ships, trains, generators, tractors, power equipment and farm machinery
•Use laptop computers and scan tools to access fault codes and make accurate diagnosis of the problem. Technicians frequently use electrical multimeters, pressure gauges and flow meters to find the cause of mechanical failures. They replace worn and defective parts and they test equipment prior to its returning to service.
•Work indoors, but occasionally work outside if a vehicle needs repair on the road or at a job site. Most shops are well lighted, heated and ventilated.
•Move and lift tools and parts. May occasionally experience minor cuts and bruises, however, with proper safety training and practices the possibility of serious injury is alleviated.


Oklahoma State University Institute of Technology

Training Center/Campus: Okmulgee, Oklahoma, United States
Phone No.: +1 800 722 4471

MHC Kenworth Truck Technology

Course Format: Public Course / Instructor-Led / Open Enrollment  V


Oklahoma State University Institute of Technology has the only MHC Kenworth program in the country featuring:
Faculty with industry specific training and experience
MHC Kenworth equipped classroom and lab with the most current equipment and technology
Paid internships that strengthen learning and pave the way for employment
Low student-to-faculty ratio
MHC Kenworth scholarships

Learn!

MHC Kenworth students maintain, diagnose, service, and repair new and used trucks that feature the latest in engineering and technological advancements using factory recommended procedures, special tools, and service information.

Earn!

With paid internships as part of the program curriculum, students can begin earning even before graduation!

Achieve!

Because MHC Kenworth has dealerships across the country, your career as a heavy-duty truck technician can take you just about anywhere you can im... [Read More]

CAT Dealer Prep

Course Format: Public Course / Instructor-Led / Open Enrollment  V


Oklahoma State University Institute of Technology has one of the premier CAT® Dealer Prep programs in the country featuring:
Faculty with Caterpillar specific training and experience
Caterpillar equipped classroom and lab with the most current equipment and technology
Paid internships that strengthen learning and pave the way for employment
Low student-to-faculty ratio

Learn!

Your Caterpillar career begins when a dealer selects you for the program. Spend half a semester on campus and half at your sponsoring dealership on a paid internship. Caterpillar supplies current products so you learn the latest diagnostic and service procedures. Students are trained to do it right the first time, so they are immediately productive on the job.

Earn!

The starting pay for a Caterpillar technician is excellent. Depending on the region, and the overtime available, graduates earn highly competitive salaries.

Read More]


College of Southern Nevada

Training Centers/Campuses: Henderson, Las Vegas, Nevada, United States
Phone No.: 702-651-3000

DIESEL HEAVY EQUIPMENT MASTER TECHNICIAN

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The Diesel/Heavy Equipment program prepares students to enter the workforce as technicians to maintain, diagnose, and repair heavy equipment. The program focuses both on over the road trucks as well as diesel powered heavy equipment, typically used in the construction industry. Students will learn diesel engine and propulsion systems, fuel management systems, related accessory components, as well as hydraulics,
welding certifications, and HVAC certifications. Allstudents will be prepared to take ASE certification exams at the completion of the appropriate course. Integral to this program is a paid internship component, allowing studentsto gain valuable work experience prior to completion
of their program, making them more employable.
STUDENT LEARNING OUTCOMES –Graduatesofthisprogramwillhave theopportunity to:
?Prepare for employment in the Diesel Technology Industry as a
Certified Technician.
?Successfully passthe followingASE/NATEF certificati... [Read More]


Ohio Technical College

Training Center/Campus: Cleveland, Ohio, United States
Phone No.: 877.611.9840

Diesel Equipment Technology

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Don&,#146,t settle for simple diesel engine training. Set yourself apart from the crowd with the specialized Diesel Equipment Technology program at Ohio Technical College. This diesel repair program is designed to teach you what you need to know to succeed as a diesel technology professional.

Diesel training includes:
? Electrical and electronic systems
? Diesel drivetrain systems
? Automatic diesel transmission
? Suspension and steering systems
? Brake and hydraulic systems
? Transport refrigeration, heating and air conditioning
? Industrial and heavy equipment
? Light- and medium-duty diesel
? Light generator systems


Des Moines Area Community College

Training Centers/Campuses: Ankeny, Boone, Carroll, Des Moines, Newton, Iowa, United States
Phone No.: 877-863-6222

Heavy Equipment Repair

Course Format: Public Course / Instructor-Led / Open Enrollment

Instruction in the repair and service of equipment relating to the heavy equipment industry. This includes all phases normally done in a general repair shop. Instruction is given under structured lab and field conditions.

Caterpillar

Course Format: Public Course / Instructor-Led / Open Enrollment  V

DMACC and Ziegler have teamed up to bring you BIG opportunities in the field of diesel technology.

Your Associate of Applied Science (AAS) degree from DMACC will open doors to an in-demand career in the diesel technology field and will prepare you to work as a service technician.


Ziegler, one of the largest and fastest growing Caterpillar equipment dealers in the United States, is looking for qualified and skilled individuals to join their team. They feature state-of-the-art tooling and machinery, a clean, friendly work environment, continued training and opportunities for career development. Browse our site to learn more about the unique and exciting opportunities this program has to offer.

The program is accredited by the AED Foundation.


Southeast Community College

Training Centers/Campuses: Beatrice, Lincoln, Milford, Nebraska, United States
Phone No.: 800-642-4075

Forklift Operations

Course Format: Public Course / Instructor-Led / Open Enrollment

This four-hour course for all operators includes safety inspections, design restrictions, lifting, moving and placing loads, driving speeds, directions and ramps. National Safety Council Certificate of completion will be given following examination at the end of the course.


Heavy Equipment Operators School

Training Center/Campus: Jacksonville, Florida, United States
Phone No.: 1-800-488-7364

Tractor (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The training instructors are made up of friendly individuals who have years of practical experience as equipment operators and professional tractor trailer drivers. All of our instructors attend training classes conducted by the State of Florida. Each instructor is required to be licensed by the State of Florida, Department of Highway Safety and Motor Vehicles.

Skid Steer (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The training instructors are made up of friendly individuals who have years of practical experience as equipment operators and professional tractor trailer drivers. All of our instructors attend training classes conducted by the State of Florida. Each instructor is required to be licensed by the State of Florida, Department of Highway Safety and Motor Vehicles.

Pages: 1 2 3 4 5 6

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses