CCNA schools/courses

Cisco Certified Network Associate programs, certificates, diplomas and degrees (On campus, Online or On-site)
Total 69 training courses/programs at schools in Philadelphia, PA, USA



Community College of Philadelphia

Campus/Training Center: Philadelphia
Phone No.: 215-751-8000

CISCO CCNA Networking Routing and Switching (Certificate)

Course Format: Public Course/Instructor-Led/Open Enrollment

This course is the first of a two-part sequence designed to prepare students for certification and employment as Cisco Certified Network Associates (CCNA). The CCNA certification indicates a foundation in and apprentice knowledge of networking. CCNA certified professionals can install, configure, and operate LAN, WAN, and dial access services for small networks (100 nodes or fewer).


Fast Lane Consulting and Education Services, Inc.

Campuses/Training Centers: Austin, Boston, Chicago, Dallas, Houston, Los Angeles, Miami, Philadelphia, San Diego, San Francisco
Phone No.: (919) 674-3100

CCNA Recertification

Course Format: Public Course/Instructor-Led/Open Enrollment

The CCNA-Status (Cisco Certified Network Associate) can only sustained by a recertification every three years and up-to-date Know-How of actual technology requirements. For special preparation to pass the CCNA-Recertification Test, Fast Lane offers a new two-day CCNA Recertification Training, which deals with all test relevant topics in compressed form.

CCNA Power Workshop (Certificate)

Course Format: Public Course/Instructor-Led/Open Enrollment  V

After completing this Workshop, students will be able to: Describe computer hardware basics, binary and hexadecimal number systems, basic networking terminology, and internetworking concepts

Identify the major components of a network system, including clients and servers, network interface cards (NICs), internetworking devices, media, and topologies
Describe the functions, operations, and primary components of local-area networks (LANs), wide-area networks (WANs), metropolitan-area networks (MANs), storage-area networks (SANs), content networks (CNs), and virtual private networks (VPNs)
Describe the major network access methods and outline the key features of each
Describe the functions and operations of switching technologies
Explain the format and significance of each of the following components to a network system: IP addressing, classes, reserved address space, and subnetting
Calculate valid subnetwork addresses and mask values so that u... [Read More]


ExitCertified USA

Campuses/Training Centers: Houston, Las Vegas, Philadelphia, Phoenix, New York City, Sacramento, San Francisco, San Jose
Phone No.: 1.800.803.3948

CCNA Boot Camp (Certificate)

Course Format: Public Course/Instructor-Led/Open Enrollment  V

How networks function, network components, and the OSI reference model
Binary, decimal, and hexadecimal numbering
Switching operations and theory
Host-to-Host packet delivery process through a switch and through a router
TCP/IP network addressing and routing
IP subnetting
Providing Local Area Network (LAN), Wide Area Network (WAN), and remote access services
How Wireless LANs (WLANs) work, including the latest IEEE 802.11n standard
Introduction to Cisco Internet Operating System (IOS)
Configuration of Cisco Routers and Catalyst Switches
Using your router as a Dynamic Host Configuration Protocol (DHCP) server and/or client and to provide Port Address Translation (PAT) functionality
Network discovery and management using Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP), Telnet, secure shell (SSH), and Trivial FTP (TFTP)
Expand a switched network from a small to medium network environment
Issues with redunda... [Read More]


ONLC Training Centers in Pennsylvania

Campuses/Training Centers: Allentown, Exton, Malvern, Erie, Harrisburg, Mechanicsburg, Philadelphia, Pittsburgh, Wayne
Phone No.: 800-288-8221

CCNA Bootcamp (Certificate)

Course Format: Public Course/Instructor-Led/Open Enrollment  V

After completing this course the student should be able to:
Describe how networks function, identifying major components function of network components and the Open System Interconnection (OSI) reference model
Using the host-to-host packet deliver process, describe issues related to increasing traffic on an Ethernet LAN and identify switched LAN technology solutions to Ethernet networking issues
Describes the reasons for extending the reach of a LAN and the methods that can be used with a focus on RF wireless access
Describes the reasons for connecting networks with routers and how routed networks transmit data through networks using TCP/IP
Describe the function of Wide Area Networks (WANs), the major devices of WANs, and configure PPP encapsulation, static and dynamic routing, PAT and RIP routing
Use the command-line interface to discover neighbors on the network and managing the router’s startup and configuration
Expand the switched network from a small... [Read More]


Texas Southern University

Campus/Training Center: Online
Phone No.: 713-313-7011

CCNA Voice (Certificate)

Course Format: Online/Virtual Classroom/Webinar  V

Our CCNA Voice Certification (640-461 ICOMM 8) course certifies the associate-level knowledge and skills required to administer a voice network. This course prepares IT professionals for specialized job roles such as Voice Engineer, Voice Manager and Voice Technologies Administrator. This certification validates skills with VoIP such as IP PBX, IP telephony, handset, call control, voicemail and develops competency in the solutions Cisco utilizes in its Voice infrastructure. Additionally, this course prepares students for the CCNA Voice Certification exam and assesses skills and knowledge related to the Cisco CallManager Express (CME) and Cisco Unity Express (CUE) solutions typically used by medium and small organizations such as companies with less than 2,000 employees, retail businesses, and small school districts.

Prerequisite(s): Any valid Cisco CCENT, CCNA Routing and Switching or any Cisco CCIE certification can act as a prerequisite

Cisco Voice Cer... [Read More]

Cisco Certified Network Associate (CCNA) Interconnecting Networking Devices Part 2

Course Format: Online/Virtual Classroom/Webinar  V

This CCNA 200-101 Interconnecting Cisco Networking Devices Part 2 (ICND2) course prepares for the exam associated with the Cisco Certified Network Associate certification. This course provides the knowledge and skills required to successfully install, operate, and troubleshoot a small to medium size enterprise branch network. This course covers topics LAN Switching Technologies, IP Routing Technologies, IP Services (FHRP, Syslog, SNMP v2 &, v3), Troubleshooting, WAN Technologies.

Prerequisite(s): Cisco Certified Entry Networking Technician (CCENT) Interconnecting Networking Devices Part 1

CCNA Part 2 Module 1
LAN Switching
•Spanning Tree Protocol Concepts
•LAN Switching
•STP Features
•STP Configuration and Verification
•Devices with Ethernet LAN Switches
•Switch Verification
•Spanning Tree Protocol Implementation
•Troubleshooting LAN Switching
•Data Plan Analysis
•Root Cause Analysis

C... [Read More]

CCNA (Certificate)

Course Format: Online/Virtual Classroom/Webinar  V

Cisco Certified Entry Networking Technician (CCENT) Interconnecting Networking Devices Part 1

The 100-101 Interconnecting Cisco Networking Devices Part 1 (ICND1) course is associated with the CCENT certification and the first step in achieving the CCNA Routing and Switching certification. Our CCENT course will prepare candidates for the Interconnecting Cisco Networking Devices Part 1 (ICND1) v2.0 exam. This course teaches the knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. Some topics include: the Operation of IP Data Networks, LAN Switching Technologies, IP Addressing (IPv4 &, IPv6), IP Routing Technologies, IP Services (DHCP, NAT, ACLs), Network Device Security, and Basic Troubleshooting.

Prerequisite(s): None

Cisco Certified Network Associate (CCNA) Interconnecting Networking Devices Part 2

This CCNA 200-101 Interconnecting Cisco Networking Devices Part 2 (ICND2... [Read More]

CCNA Security (Certificate)

Course Format: Online/Virtual Classroom/Webinar  V

Cisco Implementing IOS Network Security (CCNA)

Cisco Implementing IOS Network Security is the qualifying training to earn the Associate Level designation for the Cisco Certified Network Associate Security (CCNA Security). This course certifies individuals to work at an associate-level with securing Cisco networks. Earning the CCNA Security designation will allow professionals to demonstrate the skills required to develop a security infrastructure, recognize threats and vulnerabilities to networks, and mitigate security threats. Our curriculum emphasizes security technologies, installation, troubleshooting and monitoring of network devices to maintain integrity, confidentiality and availability of data and devices, and competency in the technologies that Cisco uses in its security structure.


ProTech Professional Technical Services, Inc.

Campus/Training Center: Online
Phone No.: 800-373-9188, 412-810-8855

Interconnecting Cisco Networking Devices Accelerated v1.1 CCNAX (Certificate)

Course Format: Online/Virtual Classroom/Webinar  V

Interconnecting Cisco Networking Devices: Accelerated (CCNAX), is a course consisting of ICND1 and ICND2 content in its entirety, but with the content merged into a single course. Overlapping content between ICND1 and ICND2 is eliminated and content is rearranged for the purpose of the course flow. This course teaches learners how to install, operate, configure, and verify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, identifying basic security threats, understanding redundant topologies, troubleshooting common network issues, connecting to a WAN, configuring EIGRP and OSPF in both IPv4 and IPv6, understanding wide-area network technologies, and getting familiar with device management and Cisco licensing. Learner will encounter more troubleshooting, and more lab time than with the previous version of CCNAX.

Duration:
5 Days/Lecture &, Lab

Audience:
Individuals seeking the Cisco CCNA® Routing and... [Read More]


Washburn Institute of Technology

Campus/Training Center: Online
Phone No.: (785) 273-7140; Toll Free 1-877-588-7140

CCNA (Certificate)

Course Format: Online/Virtual Classroom/Webinar  V

CCNA I prepares students to develop skills needed to become home and small business network installers. CCNA I provides a hands -on introduction to networking and the Internet using tools and hardware commonly found in home and small business environments.
Group meeting times will be in the evenings during the week. Hands-on learning time will be scheduled on Saturdays throughout the semester, and held at the Washburn Tech Campus. Students will need to attend enough Saturdays to demonstrate skill proficiency.


Skillsoft

Campus/Training Center: Online
Phone No.: 603-324-3000

CCNA (Certificate)

Course Format: Online/Virtual Classroom/Webinar  V

Skillsoft Mentors are available to help students with their studies for exam 640-802 Cisco Certified Network Associate (CCNA)*. You can reach them by entering a Mentored Chat Room or by using the Email My Mentor service.

* This asset has been updated in accordance with v1.1 of the vendor certification exam.

Target Audience
Individuals who are studying the associated Skillsoft content in preparation for, or to become familiar with, the skills and competencies being measured by the actual certification exam.

Prerequisites
Familiarity with the exam objectives listed below and skills and competencies being measured in the associated certification exam.

Expected Duration (hours)
0.0

Lesson Objectives

Mentoring 640-802 Cisco Certified Network Associate (CCNA)
Describe how a network works
Configure, verify and troubleshoot VLANs and interswitch communications
Implement an IP addressing scheme and IP services to meet network... [Read More]

Pages: 1 2 3 4 5 6

Ask for Training
Add Courses